MKIV Clutch and Transmission
Printer Friendly Version
| Item Number | Part Number | Illus. # | Part Name | Description | Unit | Price |
|---|---|---|---|---|---|---|
| Item Number | Part Number | Illus. # | Part Name | Description | Unit | Price |
| 147 | 3½L | 10" CLUTCH KIT | comprised of new cover plate, clutch disc, and throwout bearing and 2 clips - all new! | set | $420.00 | |
| 148 | Q1 | new clutch cover plate only | 3 1/2 Litre only | ea. | $278.00 | |
| 149 | Q14 | new clutch driven plate (disc) | 3 1/2 litre only | ea. | $95.00 | |
| 150 | Q12 | new clutch release bearing (throwout bearing) | 3 1/2 Litre only | ea | $59.00 | |
| 151 | Q13 | clip for clutch release bearing | takes 2 | ea. | $17.00 | |
| 152 | 2½L | clutch plate with disc and throwout bearing | set | $375.00 | ||
| 153 | C568 | R17 | clutch shaft lever pin | securing fork for throwout bearing - the one that breaks because it gets rusted in! - also used elsewhere on linkage - takes 2/car | ea. | $15.00 |
| 154 | C582 | R16 | clutch release fork (replaced by C9780) | ea. | $95.00 | |
| 155 | C584 | R19 | bronze bush in bell housing for clutch shaft | ea. | $30.00 | |
| 156 | C586/7 | bell housing lock plates | set of 4 | set of | $11.00 | |
| 157 | C757 | Woodruff key used on clutch pedal shaft | 2 per car | ea. | $0.90 | |
| 173 | clutch alignment tool | eliminates hours of frustration! | $5.00 |
Printer Friendly Version
| Item Number | Part Number | Illus. # | Part Name | Description | Unit | Price |
|---|---|---|---|---|---|---|
| Item Number | Part Number | Illus. # | Part Name | Description | Unit | Price |
| 174 | gearshift lever pivot overhaul kit- 8 pcs. | 2 x C1893,2 x C1915,1 x C1905,2 x C1908,1 x C1929 | kit | $52.00 | ||
| 175 | 38-51 SH & JH series gearbox gaskets and seals kit | set | $48.00 | |||
| 176 | 38-'51 SH & JH series gearbox GASKET SET only | set | $17.00 | |||
| 178 | C859 | rear transmission seal | ea. | $14.00 | ||
| 179 | C860 | large gasket for top of gearbox | ea. | $5.75 | ||
| 180 | C862 | rear extension gasket | ea. | $9.00 | ||
| 182 | C900 | spring for detent ball | ea. | $5.00 | ||
| 183 | C901/1 | synchro plunger | ea. | $4.00 | ||
| 184 | C912 | oil seal - front end cover | ea. | $6.00 | ||
| 185 | C920 | fibre plug at end of countershaft | ea. | $3.90 | ||
| 186 | C921 | felt seal in rear cover | ea. | $3.00 | ||
| 187 | C922 | detent ball | ea. | $6.45 | ||
| 188 | C924 | tailshaft bearing | ea. | $75.00 | ||
| 189 | C929 | felt washer in rear cover (3 req) | ea. | $4.15 | ||
| 191 | C1834 | gasket front of gearbox | ea. | $3.25 | ||
| 192 | C1838 | front bearing constant pinion shaft | ea. | $40.00 | ||
| 193 | C1843 | needle bearings around constant pinion shaft | ea. | $21.00 | ||
| 194 | C1849 | synchro plunger | 2 per car | ea. | $10.00 | |
| 195 | C1850 | needle bearing asembly | constant pinion shaft | ea. | $2.45 | |
| 196 | needle bearing asembly | constant pinion shaft | set/82 | $200.00 | ||
| 197 | C1856 | new countershaft for SH, JH, JL transmissions | ea. | $78.00 | ||
| 198 | C1866 | rear gasket | ea. | $5.25 | ||
| 199 | C1915 | rubber bush at base of gearshift lever - 2 required | replacing these will often eliminate a lot of sloppiness in shifting | pr. | $12.00 | |
| 200 | C1928 | S72 | jamb nut under gear lever knob | ea. | $9.00 | |
| 203 | *C2675 | gearbox dipstick | ea. | $75.00 |